Are your Blundstone tight on top of foot? Then make sure you might choose the wrong size. Getting a tight fit on the top is a common issue for Blundstone boots. And your boots are shorter in length.
Remember that there should be a minimum of one finger-wide gap between the Blundstone boot’s end and your foot’s end. That gap is also counted as ½ inch for an ideal fit. If the shoe is stiff at the top, it won’t fit over time because Blundstone never stretches in length.
In this guide, we will discuss what to do when your Blundstone are too tight, Tips for finding the right fit and the importance of the right fit.
Are Your Blundstone Tight on Top of Foot?
If you feel discomfort at the top of your feet after wearing Blundstone, you have chosen the wrong size. But should Blundstones be tight on top of foot? you may be concerned about the top-end discomfort at the beginning. New shoes cause some common discomforts. But how can you be sure if the top end of your feet is suffering from general causes or because of the size?
If you are concerned about the fit of your Blundstone boots, then you can wear them and walk around for a few minutes. You may ask why blundstones hurt the top of my foot? if you feel discomfort or pain in your foot even after walking for some time, then surely you have bought the wrong size. So you should know the wright shoe size for you.
What to do When Your Blundstones are Too Tight?
We know that Blundstone is manageable in length. But many users often ask that should my toes touch the end of my blundstones? what do you do when you’ve bought a pair of boots that is tight at the top end? Here are some steps that may help you to wear those shoes.
Wear regularly for a longer time:
Wear your boots and walk around the house or lawn for several hours. As a result, your boots will easily break and stretch.
Try to use a boot stretcher:
Boot stretcher often helps to stretch tight-fitting boots. So, you can also use a boot stretcher to get a better result.
Try a hairdryer:
High temperatures can stretch boots quickly. So, use a hair dryer or another heat producer to stretch the blundstone tight-fit shoes. Remember to wear it for a few hours after providing a hit on your shoes.
Apply Stretch spray:
There have several stretching sprays to make stretch tight-fit boots. You use a good quality spray on your tight-fitting blundstone and then walk in the shoes for a long time.
Take help from a cobbler:
A cobbler has enough experience to stretch boots with expertise. If you are still waiting for a good result from the above mentioned process, try to get help from a cobbler.
Tips for finding the right fit
The best practice is to choose the right fit blundstone boots to prevent discomfort at the top end of the feet. Here are some tips for choosing the right fit for blundstone.
Understand Your Foot Size and Width:
It is important to know the correct foot size before buying Blundstone boots. First, measure your foot and then compare the size with the size chart of the Blundstone manufacturer. It is an ideal way to make sure about your proper fit. Keep in mind that too small or too large blundstone can cause discomfort and affect the overall performance of the boots.
Similarly, knowing the foot width is crucial. Generally, blundstone comes with medium width. You should measure your foot width and compare it to the manufacturer’s size chart. Luckily, you will get available Blundstone boots for wider feet.
Blundstone naturally gets stretched in width so that you can choose perfect or tight wide-fit shoes. Excess narrow or wider boots may provide discomfort at the feet.
Check the Fit of Your Blundstones:
How to tell if blundstones are too small? it is very important to check if the blundstone will fit your feet. So, wear the blundstone boots and stand up straight with your weight. Be sure to stand with equal weight on your feet. Now observe if there have enough room in the toe box. Make sure you can move your finger easily and feel snug at the ankle. Also, note that you will not feel slipping and pinching at the heel. If you don’t get all of these features then make sure your blundstone are too small. However, you can use thinner or thicker socks with your blundstone to adjust your fitness.
Measure the Length of Your Blundstones:
You will need a measuring tape to measure the length of your feet. Since blundstone length does not stretch, it is best to measure it properly before buying. First, place the end of the measuring tape at the tip of the boot toe. Then extend the measuring tape to the back of the heel. The measurement is acceptable in both inches and centimeters.
Check the Width of Your Blundstones:
Do you know the right way to measure the width of a blundstone? Measuring the width from the sole is recommended since soles are the widest point. Then check the width sizing information from the boots label. You will see the width with three letters N for narrow, M for medium and W for wider.
Wear Blundstones with the Right Socks:
Wearing blundstone boots with the right socks is important for comfort and safety at your feet. Socks absorb sweat, provide comfort and prevent blisters. Always avoid wearing thinner and heavier socks with Blundstone boots. And must use thicker and moisture-wicking socks with blundstone.
Also, remember to use wool and cotton socks for maximum comfort on your feet. Natural material cotton and wool provide added cushioning and insulation to keep your feet warm and dry. Besides, thicker liner sock helps to reduce friction and prevent blisters.
Replace Your Blundstones If They Don’t Fit
A variety of problems can occur if your blundstone does not fit properly. First of all, you may feel discomfort and pain in your feet. Secondly, you may have blisters from wearing tight-fit boots for longer. Besides, tight-fitting blundstone may reduce blood circulation inside the feet. As a result, you may suffer from cold feet problems.
Moreover, tight-fit boots are difficult to put on and take off. At the same time, tight-fitting boots make it difficult to use socks and additional soles. So, it is highly recommended to replace your Blundstone If They don’t fit.
The importance of a good fit
A good fit for Blundstone is important for several reasons. Let’s know some major reasons.
- Firstly, good-fit boots provide maximum comfort and support at the user’s feet.
- Good fit prevents injuries and discomfort at feet in several adverse conditions in the workplace
- Ideal fit can help the boots last longer for several years
- Perfect fit blundstone will make it easier to put on and put off
- Good-fit boots improve your overall performance and productivity
- The ideal fit is helpful for a walk, running, and work more efficiently and comfortably.
FAQs:
1. How are Blundstones supposed to fit?
Blundstones supposed to be true to size. However, Blundstone may get stretched over time due to the high-quality leather material. Yet you can choose a half size up wider boots for wider feet. However, choose the right length and ensure there has ½ inches space from the top end of the toes to the boots.
2. Do Blundstones get easier to take on and off?
The ideal fit blundstone gets easier to take and off. If you have a tight-fitting blundstone, you can’t easily wear or take those. Besides, you may feel stiffness with your blundstone in brand-new condition. That brand-new condition may be difficult to take on and off.
3. Do Blundstones feel tight at first?
Yes, Blundstone may feel tight at first. But over time, the Blundstone will fit the user’s feet properly as it is made from premium leather that is broken after use. You can ensure that the leather will stretch and adjust with the shape of your foot. Also, note that your blundstone will gradually get stretched.
4. Should I size up or down in Blundstone?
It depends on the wearer’s comfort and preference. It is good to go with true to size for using a snug-fit boot. On the other hand, you may up the size to use a looser fit. However, remember that blundstone leather will stretch over time. So, your snug fit also will get a bit loosened later.
Final Words:
We are ending our guide on” Are Your Blundstone Tight on Top of Foot?” here. Hopefully, you understand the reasons for the tight fit on the top of the blundstone. Blundstone may get tight at the top if there needs to be more space between the feet’ top end and the boot’s end. If you have a tight-fit blundstone, you can apply some basic methods to stretch. But the best practice is to replace your boots.
